EXTENDO 1530

Photos

Heavy-duty lift cylinders, automatic fork leveling and rear axle stabilization make the Extendo 1530 telehandler a must-have machine for operators tackling big loads.

DOWNLOAD SPEC SHEET TIER 3 MACHINES AVAILABLE IN SELECT REGIONS

FEATURES SPECIFICATIONS OPTIONS

FEATURES -

Engine

The 1530 is powered by a 130-HP Cummins Tier 3 turbo diesel engine with full electronic control and protection.

Transmission

Modulated Dana Powershift transmission, with 4-speed forward and 3-speed reverse with declutch, allows for safe deceleration before shifting gears.

Axles

Outboard planetary axles with oil-immersed, inboard service and parking brakes offer enhanced reliability.

Lift Cylinders

Two wide-stance, heavy-duty lift cylinders are slightly angled toward the center line of the chassis to triangulate the overall alignment. This keeps the boom centered as it elevates.

Rear Axle Stabilization

The rear axle stabilization system slows and locks the rear axle oscillation for enhanced stability as the boom is raised.

Sway Cylinder

Provides 20 degrees of fork leveling (10 degrees right and left of center).

Fork Leveling

The 1530 provides automatic fork leveling without needing slave cylinders.

Reach

Achieves forward reach up to 17 feet, 5 inches and a maximum lift height of 30 feet.

Hydraulics

Pressure compensated hydraulic system and auxiliary boom tip hydraulics give operators the flexibility to use multiple hydraulic functions at once. Single joystick, pilot operated control covers all boom functions.

Quick Connect

Easily switch between standard fork carriage and other attachments.

Steering

4-wheel drive with 2-wheel, 4-wheel and crab hydraulic power steering modes provides agility in tight spaces.

Turning Radius

Turning radius of 16 feet allows for more efficient operation.

Ground Clearance

Provides excellent ground clearance of 21 inches.

Tires

Standard 16.00 x 24 pneumatic tires offer 16 ply rating for durability on any terrain.

Operator Cab

Protected by ROPS/FOPS, the cab includes an entry step, adjustable suspension seat with seat belt, adjustable right-side armrest, machine level indicator, and a full set of gauges for instant machine status.

SPECIFICATIONS +

DIMENSIONS -

Overall Height	9' 5" (287 cm) boom down
Fork Carriage	72" (183 cm) standard
Ground Clearance	21" (53 cm)
Overall Length	22' 7" (688 cm) to fork frame
Overall Width	8' 6" (259 cm)
Pallet Forks	2.25 x 6 x 48" standard
Total Operating Weight	31,520 lbs (14,298 kg)

ENGINE +

Model/Power	130 HP (97 kW) Cummins Tier III turbo diesel with electronic control and protection
Fuel Tank	32.6 gal. (123 L)

HYDRAULICS +

System	Pressure comp, axial piston
Features	Auxiliary boom tip hydraulics Quick disconnect for attachments
Controls	Single joystick, pilot operated

PERFORMANCE +

Max Load Capacity	15,433 lbs (7,000 kg)
Maximum Lift Height	30' (914 cm)
Maximum Forward Reach	17' 5" (531 cm)
Below Grade Reach	15" (38 cm) with boom extended
Maximum Travel Speed	20 mph (32 km/h)
Turning Radius	16' (488 cm)
Frame	20° of leveling (10° right and left) Rear axle stabilization system
Transmission	Modulated Dana Powershift, 4-speed forward & 3-speed reverse with declutch
Axles	Dana outboard planetary; 4-wheel drive
Steering	4 wheel, 2 wheel, and crab steer
Brakes	Oil-immersed inboard disc service brakes, integral park brake
Tires	16.00 x 24, 16 ply
Boom	Automatic fork leveling without slave cylinders 2 wide stance, heavy-duty lift cylinders

OPTIONS +

Attachments

The 1530 can be equipped with a variety of fork sizes: 2.25 x 6 x 60", 2.25 x 6 x 72", 2.25 x 6 x 96", and 2.00 x 8 x 48".

Light Packages

Available to provide added illumination to the jobsite.

Enclosed Cab

Equipped with heater, wiper and defroster.

Cary-Lift

Extendo

Traverse

Speed Swing