EXTENDO 1530 BALERReturn to Extendo
Equipped with a dedicated baler attachment to handle pipe and poles, the Extendo 1530 telehandler uses a single joystick for all boom and baler functions.
The 1530 is powered by a 130-HP Cummins Tier 3 turbo diesel engine with full electronic control and protection.
Modulated Dana Powershift transmission, with 4-speed forward and 3-speed reverse with declutch, allows for safe deceleration before shifting gears.
Outboard planetary axles with oil-immersed, inboard service and parking brakes offer enhanced reliability.
Two wide-stance, heavy-duty lift cylinders are slightly angled toward the center line of the chassis to triangulate the overall alignment. This keeps the boom centered as it elevates.
Rear Axle Stabilization
The rear axle stabilization system slows and locks the rear axle oscillation for enhanced stability as the boom is raised.
Provides 20 degrees of fork leveling (10 degrees right and left of center).
The 1530 provides automatic fork leveling without needing slave cylinders.
Achieves forward reach up to 17 feet, 3 inches and a maximum lift height of 30 feet, 10 inches.
Pressure compensated hydraulic system and auxiliary boom tip hydraulics give operators the flexibility to use multiple hydraulic functions at once. Single joystick, pilot operated control covers all boom functions.
72-inch standard fork frame with hold downs on the baler arms to keep the load secure.
4-wheel drive with 2-wheel, 4-wheel and crab hydraulic power steering modes provides agility in tight spaces.
Turning radius of 16 feet allows for more efficient operation.
Provides excellent ground clearance of 21 inches.
Standard 16.00 x 24 pneumatic tires offer 16 ply rating for durability on any terrain.
Protected by ROPS/FOPS, the cab includes an entry step, adjustable suspension seat with seat belt, adjustable right-side armrest, machine level indicator, and a full set of gauges for instant machine status.
|Overall Height||9' 3" (282 cm) boom down|
|Fork Carriage||72" (183 cm) standard|
|Ground Clearance||21" (53 cm)|
|Overall Length||21' 8" (660 cm) to fork frame|
|Overall Width||8' 6" (259 cm)|
|Pallet Forks||2.25 x 6 x 48" standard|
|Total Operating Weight||32,250 lbs (14,628 kg)|
|Model/Power||130 HP (97 kW) Cummins Tier III turbo diesel with electronic control and protection|
|Fuel Tank||32.6 gal. (123 L)|
|System||Pressure comp, axial piston|
|Features||Auxiliary boom tip hydraulics
Quick disconnect for attachments
|Controls||Single joystick, pilot operated|
|Max Load Capacity||15,000 lbs (6,803 kg)|
|Maximum Lift Height||30' 10" (940 cm)|
|Maximum Forward Reach||17' 3" (526 cm)|
|Below Grade Reach||17" (43 cm) with boom extended|
|Maximum Travel Speed||20 mph (32 km/h)|
|Turning Radius||16' (488 cm)|
|Frame||20° of leveling (10° right and left)
Rear axle stabilization system
|Transmission||Modulated Dana Powershift, 4-speed forward & 3-speed reverse with declutch|
|Axles||Dana outboard planetary; 4-wheel drive|
|Steering||4 wheel, 2 wheel, and crab steer|
|Brakes||Oil-immersed inboard disc service brakes, integral park brake|
|Tires||16.00 x 24, 16 ply|
|Boom||Automatic fork leveling without slave cylinders
2 wide stance, heavy-duty lift cylinders
Available to provide added illumination to the jobsite.
Equipped with heater, wiper and defroster.